Line marking, in most cases has to be durable, visible and accurate whether it’s on a games pitch or highlighting a safe route, so it’s important to get it right.
Here’s a brief overview of how to prepare for your project and help choosing an appropriate line marker.
First draw out your layout to scale (if you have CAD software you can quickly adapt and change the plans easily). If necessary and feasible, chalk out the area to ensure the layout works sufficiently well to allow room for manoeuvring vehicles, doors opening etc.
If you’re really new to this, do some research into colours. Colours and layouts for sports pitches can be found at Sport England, for general use and safety, the colours are shown below:
Yellow – Proceed with caution, used for aisles, walkways and traffic lanes (or cross hatching at junctions)
Select an appropriate time to line mark
Prepare a time in advance to undertake the line marking work i.e when no one else is around. The last thing you need is a line blurred because of someone’s footprint. Or worse, a customer complaining about paint stains on their footwear.
Choosing a line marking paint
Some specialist water based polyurethane line paints are ideal for sports hall/indoor court lines especially where multiple coloured lines intersect. A line marking machine achieves good results and specialist contractors generally undertake this kind of project
For most circ*mstances such as in warehouses, factories, workshops, car parks etc a good quality acrylic line marking spray is usually a good choice. Hard wearing and fast drying, these are easy to use on most surfaces and are suited to exterior and interior use. Small areas can be marked by hand but applicators are available in two wheeled and 4 wheeled options. The aerosols just slot into the applicator – they generally make the job of line marking much easier and are well worth investing in if you need to line mark more than a couple of times.
A road line marking paint is a good cost effective solution for industrial internal and external applications such as yard areas, car parks and walkways. Ours is a solvent borne durable line marking paint developed for industrial applications which can be applied by spray, brush or roller and is most suited to tarmac and concrete. With a semi-gloss finish, we can provide this in shades from the Ral Classic, BS 4800 or BS 381c range. It’s also available in 3 stock shades, Black, White and Yellow.
Always check data sheets to ensure the product you choose is the correct one for the job before proceeding.
Line marking spray ideal for tennis courts
What Width Should Lines be?
If you are painting on a public highway you will need permission from your local authority where they will also advise on standards. However it is also useful to apply generally accepted widths wherever lines are being painted for directional and safety purposes. These are as follows:
- – 50mm – dashed lines indicating parking spaces
- – 100mm – lines indicating parking space separation
- – 100mm – double yellow lines
- – 100mm – hatched areas
- – 150mm – lines indication lorry parking and cycle lane delineation
- – 200mm – lines showing priority (at junctions for instance)
- – 200mm – loading bay marking
- Lines and colours for sports pitches are generally as follows (but check the link to Sport England mentioned above for clarification )
- – 40mm – Badminton
- – 50mm – Netball (red), Basketball (black), Hockey (blue), Tennis (yellow), Volleyball (green)
- – 80mm – 5 a side football etc
Painting a White Line Across a Driveway
You may have noticed white lines across dropped kerbs in front of driveways to both business and residential properties.
These are generally aimed at preventing vehicles parking there and obstructing access. Can you just grab your white line spray and create one for yourself? The answer is ‘no’, there are strict rules about painting white lines or “H markings” outside your property. In most areas of the UK it is illegal to park across a dropped kerb and a white line can help to deter drivers from doing so.
If you have an access/dropped kerb and feel you need a white line painted, you must contact your local council’s highways department for permission. They will usually perform the job to the relevant highway standards and charge you for this. Further information can by found at Safer Motoring
How to Apply Line Marking Paint
There are various methods available to help apply line marking paint effectively and to get lines straight. For larger areas especially where you want to avoid bending, a line marking applicator is useful; this is a wheeled applicator which produces clear and precise lines.
A line marking aerosol spray is positioned into the applicator and is dispensed by pressing the applicator trigger. If you’re not using an applicator but are still using an aerosol, mask off two parallel lines using a spirit level and masking tape, then spray in smooth, consistent strokes.
Note that you will also need to cover surrounding areas to avoid over spray.
If you are using paint rather than aerosol, the easiest way to apply is to follow the same principle with tape and a spirit level then apply with a mini (4″) roller. Stencils are also available to help with lines and lettering, please contact us here at Palatine Paints with specific requirements as these are not always shown on our website.
Quick links to products mentions in this blog:
Acrylic Line Marker Spray 750ml
Road Line Marking Paint 2.5L | 5L
Industrial Masking Tape
Mini Roller Sleeves 4″ (solvent resistant)
Mini Roller Frame
We hope this information has helped you and as always if you need more information try our online chat, leave a comment or give us call!
Contacting us is easy!
Email:[emailprotected]
Call Us:01942 884 122
Contact form:https://www.palatinepaints.co.uk/contact-us
Live Chat Service:Press the small blue icon at the bottom left of your screen.