How to Lay Out Recessed Lighting (2024)

1

Determine Your Lighting Application

How to Lay Out Recessed Lighting (1)

When planning your recessed lighting layout, the first step is to determine your end goal. Think about the function the light will serve.

There are four main purposes for lighting:

  • General lighting: Bright, even light pattern that illuminates overall room or area
  • Accent and task lighting: Bright, focused light to highlight a single small area
  • Wall wash: Emphasizes a wide vertical surface, such as a wall with a fireplace or large wall art
  • Specialty lighting: Specific trims, typically for wet locations such as a shower or steam room.

Therecessed lighting housingtype you need is based on the type of installation you’ll be doing. New construction housing should be used if the ceiling is accessible. If the ceiling is not accessible, you must use remodel housing. For example, if you have a drop ceiling, you would use remodel housing. Additionally, if the housing will be in direct contact with insulation, you must use IC-rated housing.If you're using non-IC housing, insulation must be at least 3 inches away from all sides of the housing.

Beyond that, the size andrecessed lighting trimstyle of your housing comes down to a matter of preference and the lighting effect you’d like to achieve.

Recessed lighting housing is available in three sizes:

  • 6-inch: The most common size, 6-inch recessed lighting housing can be used for all applications.
  • 5-inch: This size housing fits more tightly around the bulb. It can be used for all lighting applications.
  • 3-inch/4-inch: The smallest sizes of housing are used mainly for small areas.

Recessed lighting trim styles vary.

  • Reflector styles maximize light output.
  • Baffle styles minimizes glare. The baffle style is most popular.
  • Eyeball styles provide adjustable directional lighting.
  • Open styles offer an economical option with an appealing finished look.
  • Lens styles diffuse the light and shield the lamp. This style is used for closets, porches and shower lights.
How to Lay Out Recessed Lighting (2)

Take the measurements of your room. Then sketch the general dimensions of the space on grid paper. Be sure to mark the placement of items such as workspaces, counters, shelves and furniture. If you want to light a wall hanging or other artwork, add it to the sketch.

Make the room's focal point the start of your recessed lighting layout plan. Your focal point might be a kitchen workspace or a painting on the wall. Build your plan outward from there. If you don’t have a specific focal point, simply start your lighting plan from the center of the room.

3

Calculate Lighting Placement

How to Lay Out Recessed Lighting (3)

Figuring out recessed lighting spacing requires a bit of measuring and some simple math. A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light.

For example, recessed lighting spacing for a room with an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting. Remember that ideal light placement can differ from room to room.

Proper placement of recessed lighting in a kitchen may require a more creative layout, since much of the light needed there is task oriented.Counter areas can be downlit to provide light and create minimal shadows for people working in the space. Try aiming the lights toward the edges of counters so the light pools ahead of where a person would normally stand. Leaving about 14 to 18 inches of space between the light cannisters and the cabinets will also help avoid lost light in a kitchen.

Knowing how to lay out recessed lighting is the first step in upgrading the lights in your home. Think about what purpose your new lights will serve. Then make a quick drawing of the room where the lights will go. Then make some measurements in the room to figure out the best lighting placement. Once you have a solid plan in place, you can choose the type of recessed lights that will work best.

Need help identifying a tool or material to help you figure how to lay out recessing lighting? Find products fast withimage searchin The Home Depot app. Snap a picture of an item you like, and we'll show you similar products.

How to Lay Out Recessed Lighting (2024)

FAQs

How to Lay Out Recessed Lighting? ›

The formula for spacing recessed lights is the distance between the lights is always double what it is at the ends. This formula, combined with the number of lights, the layout, and the dimensions of the room or surface, is what's used to calculate the placement of recessed lighting in the ceiling.

How to properly lay out recessed lighting? ›

By dividing the total height of your ceiling in half, you get the amount of space you should leave between each light. For example, recessed lighting spacing for a 16-foot-high ceiling would be 8 feet between each light. This will provide good spacing for the overall illumination of the room.

How do you calculate how many recessed lights are needed? ›

How to Calculate How Many Lights You Need. A good rule of thumb is to measure the height of your ceiling, then divide it by two. That's the number you should use for spacing between lights. So if your ceiling is 8' high, you'd want to leave 4' of space in between your recessed lighting.

How many recessed lights do I need for a 12x12 room? ›

How Many Recessed Lights? In general, a 12x12 kitchen will use a minimum of three to a maximum of nine recessed lights to illuminate the needed area.

What is the spacing for 6 recessed lights? ›

If a 6-inch light has a spacing criteria of 1.5 and the ceiling height is 8 feet, the maximum space between each light should be 12 feet. This formula is critical for lighting a space because if the lights are too far apart, they will look like spotlights with big shadows between each other.

How far apart should 4 recessed lights be spaced? ›

4-inche Recessed Lights

It's recommended to maintain a distance of 4 to 5 feet between each recessed light. The distance from the wall to the fixture should be approximately 2.5 feet to ensure even light distribution and prevent shadowed areas.

How far should 6 inch recessed lights be from the wall? ›

If you plan to illuminate an entire wall or accent particular architectural features or pieces of art, the rule of thumb is to place your recessed light fixtures between 1.5 feet and 3 feet from the wall. If your fixtures are fixed, they should be placed a bit closer to the wall.

How many recessed lights for 400 sq ft? ›

Whatever new recessed lighting you add should work with your existing fixtures. Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination.

How many recessed lights do I need for a 10x10 room? ›

Generally, you'll need one can light for every four to six square feet. The taller your ceiling height, the more can lights you'll need. Map out your room to plan ideal recessed lighting placement.

How many recessed lights on 10x10? ›

A: Our lighting experts recommend installing one recessed light for every 4-5 square feet in a room. Thus, a 10x10 kitchen would ideally have between 10-12 LED recessed ceiling lights to achieve optimal illumination.

How far apart should recessed lights be placed in a sloped ceiling? ›

However, we would generally recommend to keep them around 4-6ft apart to achieve an even flow of light. It's also possible to get directional recessed spot lights that can be really useful on sloped ceilings to ensure that light shines directly to the floor.

How do you layout recessed lights with a ceiling fan? ›

To avoid the strobe effect of light, the recessed lights while laying out on ceiling should always be kept at a gap between the tip of ceiling fan blade. ideally a gap of 2 -3 inches between recessed light and tip of ceiling fan blade is enough to prevent strobingn of light in the room.

Where should recessed lights be placed in a closet? ›

Keep in mind that for flush mounted closet lighting, there must be a minimum distance of 12 inches between the fixture and any items being stored. For recessed lighting, the distance must be at least 6 inches. This way, any heat output from lamps will be far enough away from flammable items like clothing.

Top Articles
Latest Posts
Article information

Author: Chrissy Homenick

Last Updated:

Views: 6235

Rating: 4.3 / 5 (54 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Chrissy Homenick

Birthday: 2001-10-22

Address: 611 Kuhn Oval, Feltonbury, NY 02783-3818

Phone: +96619177651654

Job: Mining Representative

Hobby: amateur radio, Sculling, Knife making, Gardening, Watching movies, Gunsmithing, Video gaming

Introduction: My name is Chrissy Homenick, I am a tender, funny, determined, tender, glorious, fancy, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.